Structures Pogo 30 lifting keel :
Structures Pogo 30 lifting keel :

Structures Pogo 30 lifting keel :

Pogo 30 lifting keel

Length
30.00 feet (9.14 m)
Width
3.70 m
Draft (minimum)
1.05 m
Draft (maximum)
2.50 m
Displacement
2 800.00 kg
Material(s)
PolyesterSandwich
Architect
Finot/Conq
Engine
Volvo
D1-20
20.00 hp
500 hours
Type of fuel
Diesel
Transmission
S-drive
Propeller(s)
2 folding blades
Fuel tank
40.00 L
Water tank
135.00 L
Pogo 30 lifting keel :
Documentation

This Pogo 30 with a lifting keel was constructed in 2013 by the Structures shipyard. This racing / cruising monohull was a participant in the Transquadra 2017 / 2018 (and was in the lead in her Pogo 30 category after the first stage). 

Larger than her predecessor, the Pogo 8.50, she has a hull fitted with bilge pumps and an enlarged stern with a greater volume. This Pogo 30 is certain to show off powerful streamlining, she is perfectly equipped for racing and is ready to go!

This is a real gem, with plain and functional interiors and finishes and a large interior living space. European VAT has been acquitted.

French flag, this "Pogo Vento" will be available for sale in March 2018 in Martinique.

Accommodation

Standard version
Long galley on the port side
135 L water tank
Chart table on the starboard side
Central large saloon with table and settees
Aft port double cabin (2 x 1.30 m)
Aft starboard technical area
Forward berths (2 x 1.40 m)
1 marine toilet
Eberpacher heater
On-watch seats inside to port and starboard
Beech wood finishes

Galley

Sink
Gas hob
Waeco Cool freeze 18 L icebox

Sails and rigging

Carbon mast (BDF at 27°)
1 training sails set (Good conditions), with:
Star light membrane CST mainsail 34 m2 « Star voiles »
Maxi genoa Star light membrane « Star voiles »
• 1 Membranes optimized HN Star light « Star voiles »
• 1 Membranes sails set optimized HN IRC TFT « Star voiles » (new in March 2017)
1 medium genoa with reef
1 heavy genoa
2 x S2 symmetrical light spinnakers
1 x symmetrical medium spinnaker
1 x symmetrical heavy spinnaker
3 x asymmetrical spinnakers (1 reacher and 2 runners)
2 x A5 asymmetrical spinnakers reachers and heavy
Bowsprit for asymmetrical spinnakers
1 x spinnaker pole and spinnakers gear
Harken gear on deck
Wichard plate

Electronics

Navicom 650 VHF
Furuno GP 32 GPS
Gyropilote NKE autopilot
2 NKE multigraphics
1 TL25 NKE screen with 3 LCD screens on the mast
Carbowind NKE wind speed and wind direction
NKE Ultrasonic speedometer
NKE GPS
Regatta NKE gyro compass
NKE AIS B transmitter and receiver
Lap top 17’’ LED screen
Radio Hi-fi Fusion with amplifier

Electrical

Lithium 160 A batteries
Lithium Odyssey PC 680 engine battery
Alternator 115 A
Mastervolt battery charger
Victron Energy BMS battery charge control
EFOY 140 fuel cell
2 x 12 V outlets
2 x USB outlets
LED lighting

Deck

Bow roller for anchor
Spade aluminum anchor 7 kg, 5 m chain with 40 m of ropes
Swim ladder
Cleat beam

Additional

Floatability reserves (closed foam cells and crash box front and rear)
Composite hatch 3 positions (waterproof, ventilation and open)
Vinylester lifting keel and plumb
Double tillers with sticks
Double rudders new model
Spares parts old rudder
Stainless steel rudder stands
Aluminum bar to link
Self-aligning bearings
Hull epoxy treatment before first launch
Nautix A88 antifouling (in June 2017)

Sold
€170,000.00
European VAT paid
Year
2013
Location
Le Marin, Martinique
Boat reference
825
  • We speak English
  • Wir sprechen Deutsch
  • Hablamos español
  • Parliamo italiano
Central/Exclusive